Printed Glass - Specifications

Options & Possibilities

Printed Glass is available is a range of thickness’ from 4mm to 19mm, dependant on the glass type it is being applied to.

The maximum size available is 2400 x 4000mm.

Ordering & Specifying

When ordering or specifying Printed Glass, it’s all in the detail. Please confirm the following:

• Glass Type and Thickness
• Edgework Finish
• Any processing, such as holes, notches etc
• All drawings to show any processing should be viewed from the room, looking at the non-painted surface
• Completed artwork is required with the order – please supply a low resolution layout that accurately depicts the final layout, with each panel of glass clearly marked

Technical Mandatories

Glazing compounds and sealants may react with the Printed Glass.

• For installations JELD-WEN Glass Australia recommends a non-acidic silicone with a neutral base be used
• Storage Instructions: Glass should be stored in an upright position, under the following conditions:
  • In a dry, ventilated warehouse
  • Under no circumstances stored outside
  • Glass should be separated with cork pads / paper interleaving for transport